The used vnx5300 is designed for the particular midrange entry area. The refurbished vnx5300 is the introductory model for the VNX unified program. It supplies block as well as file companies, solely file solutions, or only block companies (without X-Blades along with Manage Stations), along with makes use of some sort of DPE.
The actual emc vnx5300 hard drive uses a 1 . 6 Gigahertz, four-core Xeon 5600 processor chip with 8 GIGABITE RAM and a maximum of a hundred twenty five drives using the following block-based host connectivity choices: FC, iSCSI, as well as FCoE.
The actual emc vnx5300 hard drive utilizes a DPE and is for sale in 15 a several. 5" drive or even 25 x second . 5" drive form factors. It includes four onboard 6 Gb/s Fibre Channel slots and two 6th Gb/s SAS slots intended for back-end connectivity on each of your storage processor. You will find a micro-DB9 vent and service LAN port obtainable, that are used for a backup approach to connectivity with regard to system repair.
Some sort of LAN connection is actually provided on each SP with regard to array management. Each and every SP within the enclosure also has a power supply component and two UltraFlex I/O component slots. Equally I/O module video poker machines may be filled on this design. Any slot machine games without I/O modules will be populated with blanks (to make certain correct airflow). The fault/status light in the DPE form factors can be found for the rear, which can be distinctive from previous versions and vnx 5300 dae models by using a SPE form factors.
The front of the DPE properties the 1st tray of drives. This may vary from 15 for you to 25 disks according to which often DPE have been selected for the unit. Towards the top of often the enclosure, experiencing front, via left to correct, may be the enclosure problem BROUGHT (Amber), Air Channel resulting in the heat sensor, plus the enclosure strength GUIDED (Blue).
Often the vnx 5300 expansion uses a second . 13 GHz, four-core Xeon 5600 processor chip with 6 GIGABITE RAM every blade, with a maximum storage capacity connected with 200 TB for each blade. Typically the refurbished emc vnx5300 can have one or two rotor blades, as well as every X-Blade has redundant power products located in the front of the blade, and also supports the next NAS protocol choices: NFS, CIFS, MPFS, as well as pNFS. Often the CPU module can also be accessible by means of the front of each blade soon after removing the strength products. The trunk of each and every X-Blade residences the slots employed for internal/external network connectivity, back-end Nutritional fibre connectivity, and also front-end connectivity choices.
Often the used vnx5300 works with a DME which appears similar in appearance for the SPE on the VNX5700 along with VNX7500. The particular DME can property two X-Blades per 2U enclosure as well as every X-Blade
on the emc vnx 5300 expansion may accept a maximum of 2 I/O modules with regard to front-end connectivity.
About the Author: