You will see that the frame of most traditional roofs allows the insertion of an insulator of 6 or 8 cm only. You will have to, in one way or another, increase this space by placing an additional wooden lath or realizing an interior construction. In roofs with small farmhouses, there is usually enough space. Insulating these roofs usually costs less. You can buy insulation machines online
to see all the needs for your insulating needs.A home to be comfortable and efficientin terms of energy consumption must be isolated in a homogeneous way and adapted to its technical characteristics.
Prepare the attic
To move on the planks, use the board, it will support you and you will avoid falls. It is essential to be able to locate the electrical boxes once the wool in place. Attach a signal label above the desired level of wool, directly above the case. Then staple rods on the planks, well pressed against the floor. Distribute them regularly. The pins are used to measure the height of wool blown. Insulation blowing machine accessories
are available online nowadays. A worksheet is highly recommended to specify the work that has been done.
Now pass the pipes through the hatch, and then put in place for blowing. For this step, wearing a mask and gloves is highly recommended.When you are ready, ask to start the commercial insulation machine. Vacuum the wool regularly using the nozzle. Start the projection of the wool by the opposite side to the hatch. It is important not to pack the wool, do not move more on the treated areas. Take care to fill the spaces between the planks, dividing the wool regularly. The insulation by blowing is finished, it remains only to staple the labels of the bags of insulators consumed. They attest to the volume of wool blown in the attic.
Isolate an empty attic
If you do not use the attic, you can insulate these spaces by laying insulation on the floor. The choice of cool insulation machine
depends mainly on the flatness of the floor or your desire to be able to walk on the floor or not. This will make it difficult for you to properly insulate a coarse concrete floor with hard insulation boards. In a lattice placed in a ceiling, flexible or semi-hard insulation is the best choice. You can place them in two layers, so that the joints overlap.
Conclusion: Insulate a sub-roof
The term envelope often comes back when we talk about thermal insulation. The envelope of a building can be defined as the building element that separates the heated volume from the external environment. It consists of facades (walls and windows), roofing, slabs and basement walls. An insulation that has not been glued, but nailed or stapled, can easily be removed for eventual recovery.
About the Author:
For better sound insulation, the different blades (glass and gas) that make up the double or triple glazing must be of different widths (asymmetrical glazing).