The extreme summer temperatures put our homes to the test. When these dates arrive, we suffer in our flesh what implies having a poorly insulated home or with problems of ventilation and refrigeration. Whether your house is an oven or your electric bill is fired with air conditioning, these tips will be good to save you sweats. With the use of the insulation blowing machines
such options are open.
1. Windows with double glazing
The windows are the part of the building where the most energy losses are registered, so the double glazing will be a good ally for the thermal comfort of the house. They also help considerably the use of glasses that have low thermal transmission and low solar factor (ratio between the energy that enters a room through the glass and solar energy that hits the outer surface of said glass perpendicularly), or window profiles with thermal bridge breakage.
On the other hand, check the strips of the closures in the windows because they deteriorate over time. The role played by the cool insulation machines is not easy there. If they take off easily or you can feel the wind go through the closed window, they may need a refill. You can change them yourself if you remove them with hot water and clean them well before putting the new ones. Avoid direct sunlight on the crystals as much as possible. Exterior blinds or awnings will also help keep the house isolated.
2. Ventilates in the mornings and at night.
Ventilates in the mornings and at night, when temperatures drop. It is also advisable to ventilate during the day if your house has cross ventilation, which basically consists of the natural ventilation of the house, generating natural currents while opening opposite windows at the same time. Of course, pay attention to the predominant direction of the winds and on what facades the sun gives to avoid that the air that enters is warmer than the one that comes out. Here the options with the fiberglass insulation blowers are not less anymore now.
3. Isolate the soil
Soils are a source of energy loss in buildings that can easily reach values of 15%, especially those in contact with the land, with the outside or with unheated premises, such as garages or warehouses. There are materials that, in rehabilitation, help to improve the insulation of soils such as dry floors that incorporate thermal insulation in their plates, considerably reducing energy losses. Its placement is done quickly and easily without the need for drying times in its installation, as its name suggests.
4. Uses door seals
The doors also act as insulators between different departments of the house and to the outside. You will noticeably improve its performance if you adjust its closure through weather strips, flexible strips of insulating material that you can install yourself. They are quite economical and give good results. It is important that the main door of the house has insulating properties, especially if it is directly outside. With the cool insulation blowing machines the options are perfect now.
5. Minimize the use of lights and appliances
It is not recommended to turn on lights to avoid the gloom caused by excessive zeal to prevent access to the sun through the windows. Not only will you be emitting more heat but you will also have to pay more in the electric bill. Let the light seep through the slits of the blinds. You can open the interior curtains, because they are not good insulators and prevent the passage of light.
And for removing the insulation you must use Cool insulation removal machine
as these insulation vacuums
are the best in the market.
About the Author:
For better sound insulation, the different blades (glass and gas) that make up the double or triple glazing must be of different widths (asymmetrical glazing).