Old, poorly insulated houses are a real gulf for the household budget, which is unpleasant and is not right. Most of the time, the weak point is the thermal insulation of the building envelope. These are all the surfaces that separate the heated interior from the outside cold air, i.e. the roof, facade and cellar, windows and doors included. For energy-efficient and energy-efficient renovation, it is important that energy saving measures fit together sensibly. In this respect, it is interesting to know the savings potential if, for example, new windows are installed or the outer walls are isolated. Because only an optimal combination of insulation and air tightness measures prevents heat loss and reduces the energy requirement. If you are planning not just one step, but a total renovation of your home, then it's a good idea to call an energy advisor. It aims to enlighten you and allows a global modernization plan.
1. Potential savings
Some old buildings consume more than 30 liters of fuel per square meter of living space. Such greed is difficult to detect at first. It is above all infrared CoolVac Electric Insulation Removal Vacuums
that reveals the weak points in the energy level of this typical house of the 1960s. Many homeowners are now wondering if their home can be modernized in this regard, or whether it is better for them to wait. Given the foreseeable price increases in the energy market (electricity, oil and gas); as well as decreases in subsidies and financial support possibilities, it is in all cases advisable not to defer these investments.
2. Plan a complete renovation
The Confederation and the cantons have set up support programs specifically for owners or owners who want to save energy or use renewable energy. An energy council will allow you to see more clearly in the multitude of these aids and to draw up an overall modernization plan. After an analysis, the counselor puts in place an
About the Author:
For better sound insulation, the different blades (glass and gas) that make up the double or triple glazing must be of different widths (asymmetrical glazing).