1. As long as it is reinstalled, it needs to be activated again.
2, you can install office2013 and win8.1 are installed in the C drive. Then use 'Ghost' to completely clone the backup, and use it to finish it later.
Now, you don't have to activate it again, it's very fast and convenient. 'Ghost' is very useful, try it.
Ready to work
Download all required software 'Partition Assistant' + 'win8.1 Enterprise vol version ISO image'
Software sharing address: http://www.400gb.com/shared/folder_5355900_adc3e202/
Unzip the partition assistant, the partition assistant green icon appears
Note: This is not an application icon, but a zip file. Double click on it to open an English window, meaning: unzip to .... Click Browse, select the desktop, and finally click extract to find the final unpacked green version on the desktop.
By the way, if you want to use it below, double-click partassit instead of another icon. Remember!
Insert a USB flash drive or a removable hard drive
1. My win8 system takes up 9.1G space, so your U disk should have more than 10G to be able to run easily.
Because, in the future, the software/files you want to install, etc., need to be saved in the U disk.
2. It is best to use USB3.0 USB flash drive, which is fast. USB2.0 has been tested and takes more than an hour in key steps!
Pack and backup the important items in the USB flash drive to the computer hard disk
Because, when making the boot disk below, you need to format the USB flash drive. Therefore, you must back up, wait until the production is successful, then copy the backup content to the U disk.
Create a USB flash drive that can boot win8/8.1
Open the partition assistant and click on the 'Windows To Go Creator' in the left column.
This is the pop-up 'Windows To Go Creator' window
You can see that the USB just inserted is automatically recognized.
Click Browse in the above figure, select the downloaded ISO image file in the pop-up window, and then click OK.
Click to execute
Then you will be prompted to format the USB flash drive, click Yes
The following can automatically create a USB flash drive bootable bootable win8
After success, do not click Execute again, click Cancel! Look at the files inside the U disk, also contains the WINDOWS folder! That's right!
At this point, the win 8 boot disk created by one button is successfully created. Then you can use it!
However: when booting, you need to change the first boot device of the BIOS to a USB flash drive.
Set the computer to boot from a USB flash drive
Let's take the BIOS of the mainstream Award as an example.
During the power-on self-test, press the Del key repeatedly to enter the BIOS setup interface.
Note: Other BIOS entry methods may be different, you can refer to the prompt of the self-test interface.
Use the up and down direction keys to select the second item and click the enter key.
Hit Enter in the boot device sequence 'Boot Device Priority' option
Hit Enter on the first boot device option and select the 'Removable device' option 'removable dev' in the pop-up window.
Press F10 to save the previous settings, then the computer will automatically start, you will enter the win8/8.1 system directly!
Give a lesson to Xiaobai
What is Windows To Go?
Windows To Go is the latest feature introduced by win8. This function can install the win8/8.1 system to the U disk, and then you can start the complete win 8/8.1 system directly from the U disk!
In addition: the system is different from win pe. This is a complete win 8 system, exactly the same as installing it on your computer!
Can this U disk still have other things?
of course can. There is only space, you can store things arbitrarily, just like using a USB flash drive. This is very similar to the old Maotao U disk boot disk we are familiar with!
About the Author:
I'm Spanish female :).
I really love The Vampire Diaries!
If you have any queries about exactly where and how to use usb backup recovery, you can speak to us at our web page.